pipes on the back of the primer, one connects to a short nozzel on the primer and the other too a long nozzel on the primer, the long nozel is pressure so this connects to the pipe that returns to the
...primer pulls fuel from the carb,into the bulb, and pushes it back into the tank, it is not actually a primer it is a purge. because it is connected this way it is impossible to flood the engine no ...
...connection on the back of the primer, the pipe from the longer connection on the primer goes back to the tank, just remember the primer pulls fuel from the carb, into the bulb, and back to the ...
... this goes to the carb, the longer tube on the back of the primer is the pressure side, this goes back to tank, the fuel hose from the tank with the filter on the end goes to the fuel inlet on the ...
...pipes the correct way round, the fuel hose from the tank with the filter on the end goes to the main fuel inlet on the carb, nearest to the alloy pump cover, the other conection off the carb goes to ...
Question about 16 Inch Gas Chain Saw MCC1635AK
...fuel from the carb, into the bulb and back into the tank, if the pipes to and from the primer are fitted round the wrong way it will try to push fuel into the carb and make it flood, so check the ...
Question about 16 Inch Gas Chain Saw MCC1635AK
...is superb, the one I'm trying to fix has been piped up wrong, the primer bul is pushing the fuel through the carb.It will start and idle, but when ypu open the throttle it dies, from lack of
Question about Pro Chain Saw 46cc 20"
...pipes, the pipe coming from the fuel tank with the fuel filter on the end is the main fuel tube, this fits to the connection on the carb nearest to the pump cover on the carb ( alluminium cover held ...
...fuel? It is very importent which pipes you have connected to the primer bulb, the bulb pulls fuel from the carb and dumps it back to the tank, if you connect the the pipes up the other way it will ...
Question about Pro Chain Saw 46cc 20"
...Primer Bulb IS TI TWO PIPES OR ONE PIPE I have a Tanaka Brush cutter TBC 4228 and need a Primer Bulb is it a two pipe or a one pipe bulb 2 Pipe bulb usually, as it is sucking in then pumping out
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions