Questions & Answers for: fuel lines homelite chain saw

fuel line has come lose for the chain saw. And dont know how to put it back in You give this same answer for every fuel line replacement but what is the real trick to getting the fuel line back ...

...fuel line. Homelite XL75 saw. Cannot get carb to prime now. checked hose for restrictions - ok. line is sitting in fuel. Primed carb and saw starts then dies when fuel exhausted. Does it need a ...

...HOMELITE 16 IN 33CC CHAIN SAW, I WOULD LIKE TO KNOW WHAT IS THE POSITION OF FUEL LINE HOSES, IF YOU CAN HELP ME LET ME KNOW I REALLY APPRECIATE. TAHNK YOU PATTY I am not certain what you are asking. ...

...fuel lines for decay or other damage. Tighten all carburetor fasteners. Make sure you have fresh fuel mix in the tank. Does the primer bulb pull fresh fuel into itself when pumped? Turn both jet ...

...fuel lines that are in poor condition. If the engine has been running with the intake filter missing, the interior of the carburetor may be full of debris. Remove, dismantle, and clean the carburetor ...

...fuel lines for decay or other damage. If you feel the H jet setting is responsible, then you are stuck taking the saw to a servicing dealer for adjustment unless you are skilled at making such a tool ...

...fuel lines for decay or other damage. Make sure that you have fresh fuel-oil mix (50:1) and always shake the fuel can thoroughly just before refilling the tank to prevent oil starvation. Hope this ...

...fuel lines as well as fuel filter plugging and carburetor plugging are all part of the priming path--the fuel should be drawn from the tank through the filter, up to the carburetor, then out of the ...

homelite chainsaw fuel line diagram need a fuel line diagram for a homelite 330 chain saw

...tank empty then start the engine and run the residual gasoline from the line. This will help extend the life of the fuel lines. Another possibility could be a blocked fuel filter, but that is