...fuel guage reads full but i know that there is not a full tank. the jeep turns over and every thing seems to work other than it wont start checked the fuses and all seem to be ok, any ideas have you ...
Question about 1999 Grand Cherokee
...gauge jump up and down between empty and full then the needle just stopped in the empty position. I am hoping it is something simple like a fuse, but i dont know where to even start the trouble ...
always reads full untill i turn off car i have a 1991 jeep wrangler yj turn key on gas goes to full and stays there untill i turn car off the fuel sending unit is probably stuck and need to replacing.
up an aftermarket fuel gage but it reads full when empty and empty when full. not sure i have the right sending unit wire. what color would the wire be? cheers are you able to reverse the wires around
...fuel gauge is working by disconnecting the fuse from the panel, if gauge reads e then ground the fuel gauge if it reads full then the fuel gauge reads fine the its the float sensor in the fuel tank. ...
Fuel gauge registers full when ignition is switched on Fuel gauge seems to be functional as it moves from empty to full when ignition is turned on. The gauge then always registers a full tank. Bad ...
Question about 2004 Grand Cherokee
Fuel gauge not reading right. It is reading full and not moving. I have a 2004 Jeep Grand Cherokee. I filled up the gas tank and now the fuel gauge is not moving. Neither is the digital reading panel ...
Question about 1994 Wrangler
...gauge is on the eng the fsm 94 wrangler. we have a free book, 93 YJ see chapter, 8E-1 ? instrument...... (words only) then chapter,wiring, (last is list) see that? see pdf page, 55? index then on to ...
Question about 1994 Wrangler
...fuel gauge full when it is empty my fuel gauge always read full and is empty The fuel level sending unit inside the fuel tank is bad or the gauge is or there is a wiring problem This video is for a ...
fuel gauge "stuck" on full? Installed and gauge reads full always. Dropped the tank and gauge reads correctly reinstalled tank and gauge reads full again A wire or connection is getting shorted during
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions