Pilot light won't stay lit The pilot light wouldn't light. I replaced the thermocouple, now I can get the pilot to light, the pilot/heat will start, then after 10 minutes or so, I have no flame or ...
pilot light why does pilot go out after heating my deep fryer pilot light lights but wont stay on!
...Pilot light will light, burners ignite and fryer comes up to temp., the burners go off and the pilot light stay on, but when the burners start to ignite again the pilot light goes out and the burners ...
...fryer IFS-40 Pilot wont stay lit. Pilot willlight but when I turn it on and it reaches temp. theburners shut down correctly but 1/2 second later so does the Pilot,almost as if a safety trips and you ...
...fryer. Pilot will not stay lit. Second fryer has larger pilot have no trouble keeping it lit. How can I adjust the pilot so that it will stay lit? there is a small adjustment screw on the gas ...
the gas valve, turn the knob to the pilot position, push in on the knob and light the pilot. Keep the knob pushed in after you lite the pilot for at least another 30 seconds. The pilot should stay lit
Pilot light will light but won't stay lit How do you clean the orifice? I don't think it is the ortice it is most likley the thermal coupling change it and this will keep your pilot light will stay ...
...not stay lit When I light the pilot it does not stay lit clean pilot light first , you may need to change thermopile or thermocouple see what mille volts you get from thermopile need 600mille ...
pilot light wont stay lighted Hi there.Try cleaning the thermopile (cylindrical piece of metal behind the pilot) wwith a non-metal scrubbing pad. thermopile needs the heat of pilot flame to keep the ...
pitco fryer pilot light wont stay lite The thermocouple is bad or the pilot light is not adjusted to heat the thermocouple to the point where the safety shut off stays on.
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions