Questions & Answers for: front load washer balance shut

...front loader, (1 year old) starts beeping when it gets to the spin cycle and won't finish. I can get the washer to spin if I put it on spin only, but it won't complete a whole wash cycle. It is most ...

...load and this time it was much louder (kind of BANG BANG BANG BANG). Again it was at the end of the final spin cycle. I'm sure this is probably an easy thing to diagnose, but I really just don't know ...

...front-loading LG washer. Today, I took a look at it when it was beginning the spin cycle because it sounded a bit different. I noticed that it was beginning to spin and would stop because [I believe] ...

load was very off balance. It shut off a few times. She got it to finish the cycle but now it won't come on at all. Not even a hum for water filling. Is there a censor preventing it from starting now?

...cycle didn't finish, water still in machine after cycle completed. Possibilities: load is to small, add one or two similar items- out of balance load, redistribute clothes and try again- Good luck

...front-load 110.47511701. I have power but all controls will not power on. Is there a manual way to open the door? Have you tried unplugging the unit and waiting for a minute and then plug it back in. ...

...washer "tests" the load balance by either rocking or slowing rotating. If it senses and off balance condition, it will attempt to "rebalance" the load by itself and then retest, rebalance, etc. until ...

...bottom front panel apart and then clean the drain filter pump assembly completely, make sure the washer is unplugged before working on it. Please get back to me if you have any other questions. ...

...Front Load Washer stop spinning after the washing cycle goes through finishes the washer shuts off right before the spin cycle Hello Kathy Murphy - Is the washer making a humming noise? If so, either ...

...load washer won't finish the spin cycle. Once in spin cycle it starts to shake violently and then stops and restarts the wash cycle all over again. Once in spin it will begin to spin and it spins ...