Questions & Answers for: front fork seal replacement harley

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...harley davidson fat boy fork seals leak it has chrome lowers.I changed the seals twice already. Either the seals were not installed correctly or your tubes and sliders are excessively worn. Not ...

Ad

Question about 2005 Boulevard C50

1 Answer

...Fork angle of C50 vs Harley fat boy 3) When does C 50 need engine works (Piston/re boring/major engine works) 4) Most common engine/maintenance problems in C50( 2005-2009) 5) Is worth buying used C50 ...

Ad

Question about 2003 FLSTFI Fat Boy

1 Answer

front fender,top fork cap and loosen lower triple clamp bolts under head light cover, forks are now out! Remove 6mm bolt at the bottom of the fork leg and drain oil,remove dust seal and wire clip, now

...fork oil front fork oil capacity @ Im changing the fork oil in my 2006 Harley Davidson fat boy. how much oil goes back in? thank you Hi, Dcoffin52 for this scenario you will need your service manual ...

Question about 2003 FLSTFI Fat Boy

1 Answer

...front fork is leaking fluid. it is a Fat Boy fork assembly, but it is on a custom bike (Kenny Boyce FXR frame.) leaking at the seals on the slider? Or at the top above the tree? Either way, the fork ...

Question about 2004 FLSTF - FLSTFI Fat Boy

0 Answer

fork oil for 2004 Harley fatboy and how much in a oil change out no seal replace Hi 88bluefuelri, for more information on your question please visit the websites below and good luck: Cycles Capacities

...end shakes when front brake applied on 2000 dyna not hard shake but there is a shake CHECK FOR A PLAY IN THE TRIANGLE BEARINGS, AIR PRESSURE IN THE TIRE, AND ANY OIL LEAK IN THE FORK OR THE FORK

2012 flstf fat boy front fork slinging grease out what could cause this Front fork slinging grease out and making squeaking noise BAD SEALS MAY BE, PROBABLY BEST TO GET IT TO A GOOD MECHANIC? GOOD ...

Question about 2011 FLSTFB Fat Boy Lo

0 Answer

...front forks fat boy lo flstfb Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day. Cycles Capacities and Fluid Requirements Fork Filling ...

...front fender THIRD remove the slider tube cap, spacer and oil seal from the top of one fork side. FOURTH loosen the pinch bolt and pull the fork side from the brackets. FIFTH repeat Steps 3 and 4 for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...