Questions & Answers for: front end spec

...front end installation. Upper control arm to frame and upper control arm pivot nuts.Lower control arm bolts (forward and smaller rear bolts) two large steering rack to cross member torque spec call ...

...ON WHERE IT HOOKS TO THE STEERING SECTOR AND THE TORQ SPECS ON BOTH BOLTS THAT ARE ON THE END OF THE FRONT FORKS? steering sec is going to be 83 lbft/ftlbs and wheel bolts are going to be 95 ...

...front end. Steering Gear-To-Cradle Bolt...........135 ft pnds Steering Gear-To-Crossmember Bolt (Dakota 2 WD)..........190 ft pnds Suspension Cradle Plate To-Cradle Attaching Bolt..............123 ft ...

how to compute the front caster spec,the camber spec,the front toe specs. . you must have a computerized front end alignment dianogstics machine for that

what are the specs for my 1999 camry xle v6? I have a 1999 Camry XLE v6 I change the outer and inner tie rod ends I need the correct specs for inner and outer tie rod ends Where online can I find ...

what are the front tie rod end specs for 1999 Camry XLE v6 the tie rod ends were replaced on the front Tighten the tie rod stud nut to 36 ft/lbs and the jam nut to 41 ft/lbs.

what is the torque specs for a tie rod end on a 1994 toyota camry front tie rod end torque specs The tie rod end adjusting nut, 54 ft lb or 74 Nm The tie rod end ball joint nut, 36 ft lb or 49 Nm

...front end shimmies or shakes real bad when accelerating between 45 and 55 mph. I have repaced the hubs, bearings, cv axles and front motor mount. Any suggestions The tires may be the issue, swap the ...

...front end suspension on a 2010 Ford Fusion https://www.youtube.com/watch?v=gT7_FRdqCy8 ...

...Front End Torque Specs toyota-specs.com https://toyota-specs.com > cars > 2006 > tundra4.7 > t... Toyota Tundra Front Axle Nut Torque Spec : 203 ft-lbs · Toyota Tundra Wheel Hub Torque Spec : 100 ...