Questions & Answers for: frigidaire washer code e47

Question about GLTF2940ES Front Load Washer

1 Answer

...Washer times out and shuts off at 6 minutes remaining in final spin cycle. Any function- heavy, normal, permanant press etc. Door lock working OK Error code E47 Can't clear code even by un-plugging ...

Ad

Question about ATF6000ES Front Load Washer

1 Answer

...are on what is going on? press cancel. (turns off washer) press start/pause (wake up) hold cancel and start/pause 10sec last error code will come up. E47 you need to replace door lock.. hope it ...

Ad

Question about GLTF2940ES Front Load Washer

1 Answer

no spin i have a frigidaire GLTF2940ESO front loader and we are getting the error e47 E47 and E48 are door lock error codes, also check the wire harness connections too.

Question about GLTF2940ES Front Load Washer

1 Answer

Frigidaire GLTF2940ES3 Past few loads have been sopping wet when I go to remove them from the washer. I did a check and get E47 as an error code. Also noticed that when I did a drain/spin cycle and it

Question about GLTF2940ES Front Load Washer

1 Answer

...Washer Frigidaire Affinity Front Loading Washer Error Codes Whirlpool Duet Washer Door Latch Stuck in Lock Position; Washer Repair Replacing the Door Latch Assembly in a Kenmore / Frigidaire Front ...

Question about ATF6000ES Front Load Washer

1 Answer

...E47 code repair The E47 error code is usually an indication of a failed door lock/latch.  To verify this, you will need to ohm out the PTC on the door lock.  If the door lock does not ohm ...

Question about GLTF2940ES Front Load Washer

1 Answer

...frigidaire washer would wash but no final high-speed spin...checked error code and got E47...went on 1 week vacation...came back and washer will not work at all, not even in diagnostic mode...new ...

Question about Affinity ATF7000E Front Load Washer

1 Answer

...Frigidaire Affinity washer, model# ATF7000E. The E47 code states that the control board of you appliance thinks that the door is open. This could also be a false error code. I suggest resetting your ...

Question about Affinity ATF7000E Front Load Washer

1 Answer

...Frigidaire washer. If so, then the E47 code is telling you that the main board thinks the door is open on spin. Go to this web address and it will tell you how to check the electric door lock mech. ...

Question about Affinity ATF7000E Front Load Washer

1 Answer

...Frigidaire washer is displaying an error code of "E47". An "E47" error code means that the board thinks the door circuit is open in spin. This could be potential issue with the door lock or main ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...