Questions & Answers for: frigidaire stacked washer dryer heating

...stacked washer dryer whose dryer doesn't heat although the drum turns. I want to check the heating element but don't know how to get to it. Any suggestions? Jay Smith Unplug unit! Remove top screws ...

...not hot. frigidair dryer is not heating up very well. you need to check your vent and if it is clean then check your heater some of them have 2 heaters side by side and 1 could be all that is ...

...frigidaire stack washer/dryer - the washer works fine , but the dryer won't make a sound - plug secure and breaker is fine wires tightly screwed - but no dyrer It sounds like the dryer motor please ...

...washer and dryer Frigidaire model number fgx831cs1. The dryer is not heating up. It seems to be working fine otherwise but it won't heat up. The stackable is only 3 years old. it sounds like your ...

Frigidaire stacking dryer makes a noise when it heats up. As long as it is on medium heat, it is fine. If it is on high heat, after a while the noise starts. The dryer runs fine other than this. Maybe

frigidaire stacked washer/dryer with model # FEZ831CAS3.The dryer is spinning but the heater is not working.The manual states that I have to replace the fuse/s.Where can I locate the fuse/s? There are

...dryer stopped heating up...it still spins but without heat Dryers are pretty simple. There is a door switch, a thermostat, and a heating element. The thermostat is what generally goes bad in a dryer. ...

...heating element on my Frigidaire FEX831CS0 washer dryer combo burnt out, how much will it cost to repare it Here is a link to the part you need. I do believe it comes with instructions for the

...frigidaire glet1142cs0 top load stacked washer/dryer. the dryer turns but doesn't heat. not sure how to change the fuses or the heating element. please help UNPLUG THE MACHINE. Take the back off the ...

...Frigidaire GLEH1642DS Front Load Stacked Washer/Dryer. I see that the washer will not work until dryer is turned on and the dryer will not heat. I would recommend giving the appliance a hard reset. ...