Questions & Answers for: frigidaire affinity front load washer

...board. E95 Communication error. Replace the control board. My Affinity washer gives E 36 and E68. E68 says test 14 just what is test 14. my dryer has a code E68 the dryer is a frigidaire ...

Frigidaire Affinity ATF7000ESI - won't spin I have a the above front load washing machine. It washes the clothes, but, won't spin out. The door shows as being locked. We took apart the back and ...

...front load washer M# ATFB6000ES0. Sets code E47 (Thinks door not locked) Wax Motor checked open first time. Removed, opened, reassembled, checked again @ 1587 ohms. Later at 1890 ohms. (Should read ...

...Frigidaire Affinity Front Load Washer, Model LTF6000FS0, yet my washer is is draining but it is not spinning. The motor is running but there is no movement in the tub. I had a repair guy come out and ...

...front load washer 417.44082400 a E-47 code comes up. Pump out the water but won't spin. The E47 indicates that the Control board is sensing the door PTC circuit is open during spin. Power off the ...

...Frigidaire Affinity Front Loading Washer Error Codes Whirlpool Duet Washer Door Latch Stuck in Lock Position; Washer Repair Replacing the Door Latch Assembly in a Kenmore / Frigidaire Front Loading ...

...washer does not have a digital display you have to do the following: 1. press any button to "wake up" the machine.2. press and hold the start and pause buttons.3. count the flashing lights.a) first ...

Frigidaire front load washer Model ATF7000ES1 (made in 2006) won't spin. Checked hoses and basket, some bobby pins removed. Still won't spin. Error code E47. Checked lock assembly with Ohm meter, read

...code E47 generally means that the door lock assembly may be defective, shorted or open. It can also mean that the main control board has gone bad. Sometimes, resetting power to the unit for about 10 ...

...Frigidaire Affinity washer, model# ATF7000E. The E47 code states that the control board of you appliance thinks that the door is open. This could also be a false error code. I suggest resetting your ...