Questions & Answers for: Mercury where does the freon go in at

...low on freon. Front is fixed orifice tube sytem. does not tolerate low freon. rear is a valve system. get feon level checked. go here for more help.

...wont work when i hit the automatic button 1st Thing, Located Someone With a Set Of A/C Gauges 134A Freon, Make Sure Your A/C System Has Enought Freon In It, There Is a Low Freon Pressure Switch In ...

...orifice tube that needs full system to work. Probably one can low. Use a filler with a gauge so you can monitor pressure. Do not go over 45 psi. Or, have an a/c shop add the freon with his

...vehicle to a mechanic to charge your a/c system or go to your local auto parts store and purchase a can of freon with a gauge and hose on it. Read the instructions and charge your system with

...comes out WHEN AC UNIT is on i just notice that the compressor does not turn on.. Possible Low on Freon, Bad Compressor Clutchhead, Blown hose, which in turn let all the freon out. Manually power

...compressor is turning the clutch (center of the pulley) get a set of A/C gauges and check for any freon in the system (static test) high pressure side should read above 200 psi, remove the low ...

...This is a sigh of low freon...the low pressure switch is making the compressor go on and off.. You can buy a small kit of 134A freon at walmart and put it in your self...hope this helps

...go to? I have put freon on it but still doesn't work. go here for help http://groups.yahoo.com/group/villagerquest/ Still sounds low on freon. Most with rear a/c have rusted lines under body. ...

Clutch will not come on. I was going to put Freon in but the gage indicated too much pressure, in the red. The freon pressure will read close to air temp when the compressor is not running. On both ...

...and refill the system with modern freon and the seals and bearings are suppose to handle the new chemicals. So for the Freon recovery aspect, you need to go to a professional for this