freewheel hubs are stuck in the drive position, i have taken off hubs and cleaned the lock/free leaver ,this now works fine but hub still remains in drive position all the time is it possible to strip
hub with sticking freewheel I have old Promax 7 speed ATB disc brake hub with sticking freewheel. Sometimes it spins freely, sometimes it catched and locks up. I have disassembled hub to try to remove
...terminology is a bit off. The five speed gear cluster is called a freewheel, and you need a freewheel removal tool and benchvice to get it off, and yes it threads on to the hub. Refer to: ...
Question about Meridian Adult 26-Inch 3-Wheel Bike
hub/freewheel keeps spining it freewheels both ways, I tried to pedal but it just freewheels as if there is nochain I checked the chains and the third sprocket but center on just keeps on freewheeling
...sprocket does not engage when pedaling It sounds like the freewheel mechanism within the rear hub has failed. When freewheeling does the hub click at all? If not, you will require a new rear
Question about Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine
...pulling the pins on the wheel hubs, pushing the wheels "in" and reinstalling the pin. This allows the hub to "freewheel" on the axle and the pin just keeps the wheel from falling off. Hope this
Question about Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine
...hub and chain keeps coming off if not continually pedaling. Sounds like the freewheel mechanism is jamming up. You could try soaking the freewheel, where the sprockets are, in something like WD-40, ...
Question about Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine
...freewheel hub, then what is happening is the pawls inside the freewheel or the cassette are not engaging. They are activated by small springs within the freewheel or cassette. The springs could be ...
Question about Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine
...hub and how the single cog is connected to the rest of the drivetrain. Single speeds are fitted with a freewheel cog that rotates freely one way but locks up the other. This means that the cog will ...
Question about Bilt, Tuffy, Rear - Tine Tiller, 4.0 Tecumseh Engine
...freewheel would be the common solution. If you actually mean the rear hub ball bearings you need to follow proper repair procedures and will need specialized tools If you have a local bike co-op ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions