...You can also identify any of them by pulling a head and measuring the bore and stroke. One formula for displacement is: (Bore divided by 2 x bore divided by 2 )x 3.1416 x stroke x 8 =
...you please tell methe formula to convert cc into hp There is no formula to convert volume to power. Two different engines with the same displacement (cc) can produce different amounts of power
...WD-40 on the wires/coil. It displaces the water (Water Displacement Formula 40) and arc less. You may also want to put some dielectric grease in the boots of the wires on each end to help seal
The formulas were working well, now it's saying no solution even though I'm using the same formulas. I've cleared out the memory. Any other idea? Have you entered enough data for there to be a ...
...formula to convert Cubic Centimeters to Horsepower. It doesn't work that way. Apples and Oranges. CC's are a unit of volume and horsepower is a calculation of work load. Only a dyno would be able to ...
Question about 10bII Calculator
...has a lock vibratuion when trying to lock I believe moisture got in there what will it cost to fix Nothing. Spray with Water Displacement (formula number) 40. That is what WD40 is correctly used
Question about 10bII Calculator
...at the plug is excellent. The throttle body is spraying plenty of fuel. check coil - spark plug wire Use Water Displacement formula 40, which is its proper use as a water displacement spray.
Question about 10bII Calculator
Displacement (formula 40) spray. You do not need to displace water. Also when it fully dries, it leaves a waxy film to further shed WATER. People use it for everything, it smalls nice, but it was made
Question about 10bII Calculator
...Displacement) formula 40 (WD40) is ideal for the job. not sure why it would scream, but if it is water related, WD40 should fix it. Locate where the noise is coming from. If it is a sounder in the ...
Question about 10bII Calculator
...leads and all the connectors in the engine bay. That is what it is for 'Water Displacement (formula) 40. I did mine today. Number 1 tip, do it with the engine warm, and leave it overnight to dry.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions