Questions & Answers for: ford van egr sensors

Question about 1992 Econoline

3 Answers

...ford van driving badly my van idels or surges at idel, and when i drive it it jerks. replaced plugs, wires, cap and roter, coil. cleaned my egr. problem is still there. any help would be great If the ...

Ad

...EGR valve system. We cleaned the component surrounding the valve (sensors etc), at first the light would go off then after a few miles would come back on. the we replaced everything, but the valve ...

Ad

...ford windstar ,runs great,get the van up to operating temp,shut off van and try to restart 15 mins later its very hard to start.....if you leave it and come back when it's cold it will start up fine ...

...ford e350 with 5.8l o/d I am rebuilding it because its a great van. The engine, transmission, all components and electrical components have been rebuilt or are new. The engine starts perfect and runs ...

Question about 1996 Windstar

1 Answer

...Ford e150 van and the van runs good on the highway and rough on the city street. tries to stall at red lights and stop signs. I took it to a garage and the computer says it is running lean on both ...

...Van 250 1999 The EGR solenoid hardley ever goes out..Probably a flow problem,,If its the 4.2 its more than likely the EGR ports...Please list the engine..I may know what to tell you to fix

...van is still running rough. any ideas? Stop, DO NOT replace expensive parts or O2 sensor! Ford Explorer codes p0174 , p0401 , rough idle and check engine light on. First thoroughly check all of the ...

...ford freestar only surges at 50 plus mph? van was tuned up plugs,wires,fuel&airfilter,new coilpack also code for egr valve check engine light on?when I fuel van gas spits back out of fuel filler tube ...

...Ford E150 with a 4.2 and is getting codes p0401 and p0325. I need egr diagrams and electrical drawings for this van. Everything is new in the system and suspect it is electrical. Ihave changed the ...

...Ford E150 van with code P0401 Had code P0401 before, troubleshoot and tested, EGR valve,EGR control selenoid, and it came down to DPFE To much voltage. Replaced DPFE with a new one, and code P0401 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...