Questions & Answers for: ford transit slave cylinder

...ford transit Locate the cylinder on the gearbox bell housing. Clamp the flexible fluid feed hose to the slave cylinder, reasonably close to the cylinder. Disconnect the feed pipe to the cylinder, ...

2011 ford fiesta clutch clutch is wanting to pull when depressed. but drove fine when parked night before. Maybe check the slave cylinder make sure there is no air in the system

Ford transit 52 plate clutch pedal goes soft then csnt change gear then pump pedal pedal goes back to normal drive for a short while then clutch pedal goes soft again and just repeats as above just ...

...Ford transit If you don't have a power bleeder you will need a helper, make sure the clutch master cylinder is full of brake fluid, have a helper pump the clutch pedal a few times and hold the pedal ...

...ford transit van I have had the master and slave cylinders professionally replaced. there are no leaks and the hydraulics have been professionally bled. The clutch changes all gears when driving ...