Questions & Answers for: ford taurus evap valve

...taurus failed due to code p0442 ecap emiss ctl sys leak detected (small leak) how do i find out what this code means? Also how do I stop the "service engine soon light from staying on? Continuous ...

Ad

Question about 1997 Taurus

1 Answer

...FORD TAURUS EVAP SERVICE PORT IS THE EVAP SERVICE PORT THE LOW PRESSURE VALVE FOR RECHARGING A/C SYSTEM W/ R-134A The AC charge port is the on low pressure AC line (large line from compressor) near ...

Ad

...ford taurus gas tank has what appears to be a fitting on the top right rear that has hoses attached. there are stains and gas smell coming from this area. my repair manual mentions a plastic push ...

Question about 1999 Taurus

1 Answer

...FORD TAURUS 3.0 OHV V-6. THE CHECK ENGINE LIGHT CAME ON AND CODE SCANNER SAID IT WAS THE CAMSHAFT POSITION SENSOR. I GOT ONE AND FIXED IT PROBLEM SOLVED. THE CHECK ENGINE LIGHT CAME BACK ON. CODE ...

...FORD TAURUS 3.0L OHV. THE CHECK ENGINE LIGHT CAME ON I HAD IT SCANNED AND THE CODE SAID IT WAS THE CAMSHFT POSITION SENSOR. I FIXED THAT THEN THE CHECK ENGINE LIGHT CAME ON A FEW DAYS LATER. THE CODE ...

Question about 1996 Taurus

1 Answer

...Evaporative emission control What is the problem with the EVAP system?? Common issues are defective gas caps and leaking vacuum lines as well as defective fuel vapor purge control solenoid

...FORD - EVAP Purge Control Circuit Possible causes- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted - Evaporative Emission (EVAP) Purge Solenoid Control circuit poor ...

Question about 2001 Taurus

1 Answer

code p0443 This code is an EVAP Emission Control System Purge Valve C Fault.

...valve, and evap purge valve has all been replaced. Received codes p0443 p0402 & p1409 are what came up when we took it to get scanne spent several hundres in repairs and nothing is working. any ...

...Ford Taurus SEL mean P1506 Idle Air Control Over Speed Error. Vacuum leak or throttle sticking: Are the vacuum controlled heater functions working properly? Try plugging off the Evap Emissions hoses, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...