ford ranger pickup-splash wiper motor replacement How do I access the crank arm nut or wiper arm clip without losing them inside the cavity? I tried the access openings and partially pulling the motor
Question about 1992 Ranger
...Ford Ranger? only the left wiper blade is working, how do I replace the right arm to wiper motor? see if you have a nut on the top of the wiper are that has stripped off. there are splines that hold ...
...ford ranger wiper problem replaced wiper motor switch and relays still want work Check for blown fuses or go outside and turn the wiper on and see if you can hear the wipers trying to move. The ...
...Ford Ranger Need help removing/replacing wiper motor in '93 Ford Ranger. Cannot get the wipers in the upright position (current motor is dead), and thus cannot access the linkage joints. I don't want ...
...ford ranger Old motor was bad, replaced with new one, but wipers just come straight down and stop. Tried to connect the arms in different positions. When i move the arms from inside, they do not go ...
windshield wiper works on one side only? the nut is loose on the bottom of the arm
...wiper arm is either loose or the gear has stripped out the arm socket itself. Try taking the arm off and turn the wipers on, if that gear still turns, then try tightening the arm back down. If it is ...
i need the clips that connect the wiper arms for a 1983 ford ranger motor works arms won' stay in hole may need to go to the Ford dealer . or if you have a clip to match one up.??? NAPA?
...ford ranger i turn the wipers on and only here clicking why? when i turn on wiper blades they do not work but i here a clicking noise wiper washer works fine the clicking goes faster when i put it on ...
...reattach wiper arms on my ranger Video says almost all (ranger/explorer similar)... How To Install Replace Windshield Wiper Blades and Arms Ford Explorer... ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions