Questions & Answers for: ford ranger starting setting

...clutch set in my 1999 ford ranger. will not change from one gear to the next.Also vehicle will not start.Plenty of battery.Will not attempt to turn over. Look into the clutch interlock saftey ...

Ad

Question about 1988 Ranger

1 Answer

ford ranger 1988 pistons are stuck hi i have git a ford ranger 88,the oistons are stuck,so that means that i cant start up,does anyone knows the solution for me . thnx in advance. Ervin. Why are they ...

Ad

can't get setting on ranger 89 timing right can't get setting on ranger 89 timing right starts and then shuts off by its self. after 2 min of runing it will lock up and somtime won't start

Question about 1998 Ranger SuperCab

1 Answer

...ford ranger what sets off fuel inertia switch'' This is set of by an impact. Usually it takes quite a bit if impact to set them off. I have however found that a car rammed into in a parking lot can ...

Question about 1986 Ranger 2WD

3 Answers

...ford ranger 2.9L not charging i have a 1986 ford ranger 2.9L and i have a new alt and i have checked all wires and it still will not charge can someone plz help me out Bad battery. check the plug on ...

Question about 1989 Ranger

1 Answer

...ford ranger, first you need a timing lite second when you start it you hold the timing lite at the crank there are degree marks near the crank you should clean the crank and there is a mark on it ...

ford ranger that will not start after it sets for several days. it has a new battery and a air charge sensor.after you do get it started it runs fin till you let it set for a few days again. Next time

I have a 2001 ford ranger 3.0 that will not start after it sets for several days.It just cranks like it is not getting gas. it has good gas pressure and good battery power. you got spark?

...ford ranger with a2.3leter.I put a waterpump on and it started fine after charged itafter setting 2weeksand replaced the belt too .then the powerstering line came loose so I tiened it then it would ...

...Ford Ranger 4x4. Manual transmission with 3.0 liter v-6 ? This information goes with the previous posting on the B1681 code! Forgot to add that information! B1681 is a diagnostic trouble code that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...