Questions & Answers for: ford obd2 codes free

Question about 2001 Explorer

1 Answer

not getting a reading using obd2 ford explorer 2001 check engine light came on not over heating Go to Autozone or a parts store that will read your codes for free ,and go from there.

Ad

...ford windstar van running ruff Can be many things. Have the ECU scanned with an OBD2 scan tool. This tool will retrieve the code that has been set and the code will indicate what part is being ...

Ad

...Ford didn't do that with OBD2 cars. You'll have to use an OBD2 scanner. If you don't live in CA, you can get the codes pulled for free at Auto Zone. Be sure to have them print the codes or write them ...

Question about 2000 Focus

3 Answers

...ford focus 2004 Hello first off Its really easy if you have and obd2 code checker if not just go to autozone and have it checked for free they can check it read the code and go in on pc and print out ...

Question about 2000 Focus

1 Answer

...ford free star 2005 , how to fix it please. Start by checking for OBD2 Codes Use the code to diagnose the misfire Codes for a misfire may not tell you what is wrong, so a repair shop would be your ...

Question about 1998 Taurus

1 Answer

...codes, this is key to finding out what the problem may be that is causing the stall. The fault code test can be done free of charge by any Autozone auto parts store, Aamco transmission or ...

...OBD2 system. I'd like to have it cleared/removed before I have to have the vehicle inspected again . HOW do I do this ? If you go to a local autozone, they will scan/clear ODB2 codes on your ...

Ford Freestyle keeps dying while I'm driving it. We replaced the battery and checked the connection and the alternator and starter are good. When it dies the battery, check engine, and oil lights come

...ford f350 dies while driving down the road wait about 20 minutes it will restart then repeatedly die again after a few minutes what causes this to happen Whatever is going on here should have set a ...

...FORD factory codes too. P1xxx UP,etc. Innova, OBD2, scan tool (I have 2) here are the steps, 1: fresh batteries in INNOVA 3x, AAA . 2: fuse that runs pin 16 power on OBD2, Power in not dead but is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...