Questions & Answers for: ford ignition barrel

Question about 1981 F 150

1 Answer

...ford short Thanks for responding to my question. You said I need to replace my ignition block. I'am not sure what and ignition block is. could it be the ignition control module. Thanks again I mean ...

Ad

Question about 1996 Crown Victoria

1 Answer

...ignition barrel with suitable tool (small hammer)while twisting on key.It may be enough to loosen it so key comes out.You will have to remove steering column cover to swap with replacment barrel ...

Ad

...ignition barrel? I am replacing entire ignition barrel for some one do to a broken off key in the factory ignition. What is the best way to pull and insert new barrel without damaging internals? You ...

Question about 1998 Windstar

3 Answers

...ford 250 van I lost the ignition key and i am trying to remove the cylinder barrel because I dont have a key. What steps must I take in ordwr to remove the cylinder barrel? I got car started without ...

...ignition switch in a 1989 ford bronco? it looks like a 2 seperate prong thing with 2 metal whole at the other end for screws..im guessing it goes in the dash or some thing next to the steering wheel ...

Question about 1989 Bronco

1 Answer

...ignition barrel out of a Ford Escort. 1996 model (R Registration). We has a small piece of wood stuck in the ignition and can not get it out. Please could you help? you need to remove the cowl under ...

...ford falcon after ignition barrel has been replaced ?? We have replaced the ignition barrel and coil on this car and still wont turn over. had the lube mobile dude out here and tested the car. seems ...

...ford windstar The ignition pin is stuck in the ignition, it broke off inside, we can't get it out. Any ideas? Hi AJ, You'll need to remove the ignition barrel and take it to a lock smith. ...

Question about 1998 Windstar

1 Answer

ignition barrel I need to remove the ignition barrel from the steering column and replace it can some one tell where I can get the tools from too undo the bolts from the top of the ignition barrel Any

...ignition and door on a 1989-1993 Ford mutang yes it should, if it doesn't the door lock or ignition barrel has been changed in the past. you should be able to be a kit with new keys, igniton barrel ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...