Questions & Answers for: ford focus rotor replacement

Question about 2000 Focus

1 Answer

...ford focus 1999 how can i tell i need new discs If steering wheel shakes during braking the rotors are warped and should be replaced.If the rotors have grooves from the old pads they should also be ...

Ad

...ford focus diesel 2002. A garage changed the front discs on my 2002 ford focus diesel estate, i have travelled about 6k miles and now have a massive shudder when braking, the garage who fitted these ...

Ad

...know what parts to buy for tuneup What parts do I need for a 2001 Ford Focus ZX3 tuneup? Plugs, distributor cap, Plug wires, rotor, and it wouldn't hurt to replace the air filter and fuel filter

...Ford Focus SE My car repair shop told me my brakes had a problem. After removing the tires, they showed me the vary obvious wear difference from one rotor to the other. They said one of the caliber ...

Question about 2000 Focus

1 Answer

replaced front brakes 03 focus front brake shake after replacement Did you turn the rotors? Drivers that drive fast, brake hard and hold the pedal down hard after stopping will warp these small rotors

my focus has weird noise on breaking loud my focus has weird noise on breaking\r\nloud squick sound any idea? On of two things, either your brakes are bad and need to be replaced, you should also have

ford focus 2000 squeaks front passenger side it squeaks on the front passenger side none stop. before and after i had the front brakes and rotors replaced no help. braking has nothing to do about it. ...

Does the 2001 ford focus have a cap and rotor to replace? or is it just a very expensive coil pack replacing the cap and rotor idea? Alex no cap and rotor, just coil, wires, plugs!!

Question about 2010 Focus 2.0

2 Answers

...ford focus 2010 gas pedal vibrates everytime i drive my 2010 ford focus. the accerelator pedal vibrates even at a very slow speed YOU MAY HAVE A LOOSE TIRE You have 3 that needs to do first is your ...

ford focus is locking up.I have had my rotors replaced and cut(twice),front calipers (twice), (and housing),pads (twice), lines all replaced.i have had my rear brakes cleaned and adjusted. Pressure is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...