Questions & Answers for: ford f250 heater does not work

work 2000 F-250 the heat does not get very hot. I have a 5.4 engine, I replaced the thermostat but that did not help. What next? have h eater coil checked or heater control knob could be going bad and

...F250 will not start when it is cold out Hello, I have a 94 F 250 7.3 Powerstroke Diesel - Direct Injection. If the temp is below 45 she does not start. I have tested the glow plug relay and replaced ...

...Ford F250, the heater does not blow hot air Hello, The heater in the past worked. It seems that the heater will only blow hot air when the truck is going constantly fast. If I slow down or stop, the ...

...heater does not work. Control light is on but no heat. I think it needs a new heating element, is this hard to fix, where should I purchase it? check you're fuse first don't change anything with out ...

...ford f250 doesnt heat. checked gates on heater core and blower assembly. every gates seems to be working properly. checked to see if truck has a heater contro valve. couldnt find it. checked the ...

...ford f 250 overheating tried new cluch fan x2 new radiator new thermostate new watrer pump new hoses and new sending unit what now? Who did the work? If you did. Did you bleed the air out of the ...

...heater does not blow hot air just cold in a 1993 ford ranger check the cooling system to make sure the system is full.next check the temperature of the heater hoses when the car is at operating ...

...ford f250 v-10 heater does not work why? Have you checked the water on the radiator? The water may be low. This will stop the heater. If the water is ok lokk for a value in the heater hoses check and ...

...ford f250 after I replaced my thermostat and heater core? No heat have changed the thermostat and still no heat Does anyone know... scroll down on link to see the various possible issues.Good luck ...

...heater if sametimes wokr posible you have a bar blower motor whit worn brushes If the blower sounds fine when it does work, I would be looking at the switch. Turn the switch slowly to see if the ...