Questions & Answers for: ford f250 front axle joint

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

...front ujoints have gone dry and one of the caps have cracked you will need u-joints,frt hub seals,axle shaft dust seals and hub o-rings.most ford dealers charge 3 hrs for the hub service(seals) and ...

Ad

Question about 1997 F250 SuperCab

3 Answers

ford f250 steering problem 1997 ford f250 7.3 l 4x4 . When turning especially to th right, the steering wheel will not come back fully. It fights you to the right and will actually pull the wheel that

Ad

ford f250 4x4 7.3 liter diesel , intermittant steering problem I am expierencing a pull to the right. after turning either direction steering wheel will not come back to center. holding wheel tight it

...front stub shaft removal How do I pull the stub shaft from the differential for u-joint replacement on my 95 f-250 4x4 with a 4600lb axle. My old ford had a retaining ring that un bolted but this one ...

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

...FORD F250 4X4 7.3L DIESEL CAN YOU REPLACE THE LOWER BALL JOINTS ON A 2000 FORD F250 4X4 WITHOUT TAKING THE FRONT HUB/AXLE ASSEMBLY APART? hello,yes you do have to take the hub off to replace the ball ...

Question about 2006 F-250 Super Duty

2 Answers

...F250 FX4 Diesel Truck I have a vibration that seems to be coming from rear of truck. I have had 2 sets of tires and 2 sets of shocks, have pulled the drive shaft, both end to make sure the u-joints ...

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

front end vibrates when the hubs are locked Either the front driveshaft is out of balance or the front axle u-joints are binding and need replaced

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

...Ford pickup F250 twin I beam ball joint replacement. Wheel Spindle, F-150, F-250, F-350 Removal Raise the front of the vehicle and install safety stands. Remove the wheel and tire assembly. Refer to ...

Question about 2001 F250 Super Duty Super Cab

1 Answer

...to small tires, replaced the wheel hubs, repacked the locking hubs, nylon zip sticks on the front universals so axles don't turn. I see no contact and sound continues. Front CV joint

Question about 2000 F250 Super Duty Crew Cabs

1 Answer

...f250 with warn locking hubs that's 5 months old. My 4x4 worked great 4 weeks ago and the next time I went to use it didn't work at all. I have had both wheel bearings replaced, ball joints, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...