Questions & Answers for: ford f150 fuel rail removal

ford f150 duel tank problem, hard to start duel tank problem, will not give acturate reading and hard to start The tanks have to be removed in order to change the fuel float sensors. The hard to start

Fuel Filter on 2001 F150 Pickup Do the connectors just pry off and then snap back on to the new filter? Hi, I've done this on my F-150 before. You will need a special removal tool to do the job right,

...f150 4.6 triton. fuel rail seems to be in the way. Does it need to be removed? My haynes manual says nothing about this. So easiest way I can ask, How do I get the number 7 and 8 spark plugs out so I ...

f150 5.4L engine Suggest you pay to have it done. Believe it or not it is usually cheaper at the dealer. If you do it yourself you have to be extremely careful, especially with the four back cylinders

...filter Im guessing on this one but most ford trucks have fuel filet on drivers side under truck in the frame rail. firetruckmec is correct. you will need a fuel line disconnect tool to remove

cangeing spark plugs on a 1997 ford e-150 witha 5.4 does the fuel rail have to be removed Yes, there is so much stuff to remove to get to the plugs on these motors!!! I guess it's Ford's better ideas.

...ford f150 on the highway it dies and won,t start back. It acts like it is out of gas. Let it set 30 mins. and it starts right up Fuel Pump-a possible. The time frame of 30 minutes will vary. The ...

...F150 The fuel filter is located on the inside frame rail on the left (drivers) side of the vehicle. It is in front of the gas tank. To change it you will need a special tool to remove the lines from ...

...ford f150 wont start 1992 ford f150 is spitting fire through the exhaust does it crank over and not fire if so check for spark if tou have spark check the fuel rail for a tire valve looking device if ...

Ford F150, 5.0 engine Cant even find one You do not say what year the truck is.. but the ford 5.0-v8 fuel rails very rarly leak.. This is the part that supplies fuel to the injectors. There are rubber