Questions & Answers for: ford explorer spark 3 cylinder

Ford Explorer I have a misfire in cylinder #3 i changed the plug for that cylinder it runs fine and 2 months later it acts up again. Could this be the coil pack? very well could be or the wiring going

...ford explorer V6 Firing order 1-4-2-5-3-6 cylinder numbers firewall 123 456 front of car ________ 465 321 >wire< >connector This is for the requested 1998 Ford Explorer listed incorrectly by ...

Ford Explorer Where can I find an actual Firing Order diagram for 2006 Ford Explorer ? I took it to a Ford dealership for a diagnostic check and they said I needed to replace the wires and spark plugs

Ford Explorer 4.0 sohc For the 4.0L V6: Firing Order: 1-4-2-5-3-6 Cylinders: ...(back) 3...........6 2...........5 1...........4 ...(front) Coil Connections: ...(back) 1....2....3 5....6....4 ..(front

Ford-Explorer-Check-engine-light-light-flashing-sometimes-55948.aspx (3) the blinking check engine light means that the engine is misfiring - check your spark plug wires (they may need to be replaced)

...Ford Explorer AWD 8 cylinder. Check engine light comes on and I get code p303. Vehicle bucks at times, uses lots of gas. Believe it may be 02 censor, spark plugs and wires tested ok. Any Idea code ...

...ford exploere. my clind 3 was misfire. now some noise is coming from the top of the engine like a wislte noise that get real loud. maybe i damage something in the engine CYLINDER 3 MISFIRE COULD BE ...

ford explorer 4.0 Litre scan rreads misfire cylinder # 3 checked for spark when plug was pilled and grounded and have spark. No bad fuel smell from exhaust Fire it up at night in the dark and look for

...Ford Explorer Cylinder Misfire? http://whoisbyme.blogspot.in/2012/06/ford-explorer-cylinder-misfire.html --------- Engine Misfire codes on Chevrolet Malibu? ...

ford explore sport fuel injected 4.0 litre 2wd you have a bad spark plug wire on cylinder 4 or your ignition coil (coil pack) is bad. here is a good guide to testing coils and wires if you need it How