Questions & Answers for: ford explorer clicking front brake

clicking sound in the front drivers side wheel when brakes are applied at low speed. I had recently put new pads on the front because the rotor on the drivers side was scorn. We cut the rotors and put

...clicking from passenger side front wheel at low speeds regardless of tire position Check these: 1. Check for a rock, screw, nail, etc in the tread of the right front tire. 2. Jack up the right front ...

...ford maverick xlt 2003 , I have started having problems with my front brakes that feel like the ABS is constanly on when I brake. After I hear a clicking from under brake peddale for sometime. Thanks ...

Grinding/ clicking noise coming from the front end at approximately 15 kph. could be a brake disk/pad ,bolt in tyre drive shaft ,ask a local mechanic to have a drive

...ford exploer my c v joint on the front driver side has been makeing load clicking noise then early today i haerd a loud noise when i parked the rubber boot was snaped and the other part seems like it ...

...ford explorer runs fine in drive but in reverse engine only revs as if it were in neutral. Is it the shift cable or the transmission? to make sure which one disconnect the cable and with your hand ...

ford explore is making a grinding sound in front driver side. sounds like something is rubing wat could this problem be it could be the wheel bearing if it changes pitch ( the noise changes ) when you

...ford explore and now have vibration in front end. Does it even sitting still Could be your anti lock brake pump. If it clicks on, it will cause a vibrating. Try unplugging it and see if it goes away. ...

...ford explorer. Picks up speed as wheel turns faster, difficult to hear at higher speeds. Alignment seems fine. Tread wear is normal. Suggest you check disc brake pads. Does the sound stop if you ...

...ford explorer sport track truck,front blinkers blink fast, back ones don't work, brake lights don't work, fuses good and bulbs. Is there relays bad maybe ? Help! No relay's , wiring problems maybe . ...