Questions & Answers for: ford duraspark ignition

...Duraspark ll ignition system from a late 70's Ford 2.8. I used the 78 Mustang ll to order the parts when I did my 84 Bronco ll 2.8. You will need the distributor, rotor, distributor cap and adapter, ...

I have a ford tfi distributer but I have a duraspark ignition modular. how do I hook up the tfi module to the duraspark ll? u dont and why would u?

...Duraspark II'' ignition doesn't seem to have spark in start up, but does in run. I have replaced the ignition module, coil and ignition switch. Try replacing the pick-up coil in the distributor.They ...

...for a couple of hours seems to starve of fuel,then cut out. the mii am a Ford dealer tech of 25 years experience and here is what I have found causes this problem, it is the DURASPARK IGNITION

will crank up and run fine till you cut it off then it wont crank back up.. you may have a bad duraspark ignition modual or a bad connection from the duraspark to your coil Replace the ignition switch

...ford f250 won't start.and we changed every thing from the key to the ciol safety switch duraspark cap roder and coil timing is good wires are good power to the coil no power to the plugs were is the ...

...Ford F 150 5.0 pick- up truck. I cannot get a spark from the coil at all. What could the problem be? Check for 12 volts at the coil with the key on. This system uses a hall effect pick-up which is ...

Running old school. My truck is running old school points. Any help with wiring may have to take this into account. You'd be much better off having someone redo the duraspark ignition system on it./

do you leave distributor hooked up to factory ignition box when running a msd box No. The MSD box takes the place of the Ford ignition module (duraspark II most likely).

...Ford 150 pickup and there's a socket on the side of the distributer with no plug but there's a plug there it's round and the socket is square what does the plug do and what's it called THat is going ...