Questions & Answers for: ford connect turbo problems

ford focus 1.8 tdci 115bhp 2002 after having new clutch, turbo came in at 2500 revs instead of 1500, took car back to find split in pipe, pipe replaced, car ok for 2 months,gradually got worse now ...

turbo hose popping off when driving this hose keeps popping off when I drive truck I can not locate blow off valve. Is that the problem? Clean the hose and connecting area with an agent to remove all ...

...ford cmax titanium on a 07 plate, dne about 24000 miles, whilst driving the car loses power changing from 1st gear to 2nd gear high rev's, also whilst sitting in neutral an foot on gas black smoke ...

i have a 99 f250 with a 7.3 diesel , i started to notice a weird noise in the morning, it sounds like a vacum problem or so because i can hear like it is just blowing straight air,, and just today ...

...connect. Now if you are using ford sync yopu need to register on sync's site and this will elimate mot of your problems. Also side note you can delete the bluetooth out completely and reinstall the ...

...Ford f250 Super Duty 6.0 litre Diesel. On Tuesday my truck would not start the first 3-4 times I tried to crank, but when it did start, it was not at full strength, sounded weak, infact I floored it ...

...Ford 6.0 Turbo Diesel 79000 mi. Hose connection from turbo to cooler , Hose blew off but was not damaged . I cleaned the connection and reconnected the hose. All seemed well 300miles later the hose ...

power window the power window (drivers side) problem is the cable appears to be not connected as the motor works (up / dwn) a photo of the mechanics would be great as i cant see behind the panel ...

turbo can p2263 indicate other problems as well. - Faulty Injection Control Pressure (ICP) sensor - Injection Control Pressure (ICP) sensor harness is open or shorted - Injection Control Pressure (ICP

Ford transit connect I've had experiance with the same problem turned out the turbo needs back pressure from the exhaust pipe witch was blowing/had holes in so when 3000rpm was reached it began to bog