Questions & Answers for: ford 2003 windstar parking brake

Question about 1999 Windstar

2 Answers

2003 ford mustang won't move out of park It sounds like the neutral safety switch,I had the same problem on my 96 mustang.Please rate this solution. Turn key to on position. Push brake pedal and it ...

Ad

2003 ford windstar won't shift out of park There's a safety feature that you have to have your foot on the brake before the gearshift can be moved. In rare cases a vehicle thats parked against a ...

Ad

Question about 2003 Windstar

1 Answer

...2003 Windstar...Recently the engine has had spurts where it revs up to 2000 rpm on its own when I am in park or with foot on brake. This is inconsistent, but I am worried that it will continue and ...

...the front brakes and we've never changed the back brakes since we've owned the 2003 ford windstar van.Can someone help? the rear brakes need to be changed, the parking brakes are always the

...2003 Ford Windstar Sport van. I got in it to go uptown and it won't shift from park into reverse. I turned the wheels to see if that would help and nothing. The emergency brake isn't on. There are no ...

...2003 Ford Windstar Sport van. I got in it to go uptown and it won't shift from park into reverse. I turned the wheels to see if that would help and nothing. The emergency brake isn't on. There are no ...

Does not come out of Park, aid. Aux.Heater quit working, door locks quit, gas gauge quit, all happened at once and they were working just fine 2 hrs. Before there may be a switch on the brake lever ...

Question about 2003 Windstar

1 Answer

shift gear stuck in park its done it a couple of times not all the time,when I park then try to shift into reverse or drive its stuck. Make sure u press the brake when shifting out of park

2003 Ford Windstar V6 will not shift out of park Turn-Key one click shift into neutral car will start and run but no brake lights tail lights or turn signals Find the cause of no brake lights and the ...

2003 windstar ford van stuck in park a simple trick to finding a short is to replace the blown fuse with a pair of spade terminals, then use small jumper wires to connect them to a 12 volt light bulb.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...