Questions & Answers for: ford 1995 manual locking hubs

Question about 1995 F250

1 Answer

ford auto locking hubs i busted one of the front auto locking hubs an have been tryin to repair it but none of the parts dealers show my truck having auto hubs its a 95 F250 all they have are manual ...

Ad

...MANUAL HUBS LOCK THE WHEELS TO THE AXLES. DCL When you turn the knob to 4x4 the transfer case will engage then it will also activate the vacuum for the hubs. the truck will kick to a lower gear with ...

Ad

Question about 1995 F250

1 Answer

manual locking hubs I want to go the OTHER way: from manual to autolocking. Is this possible? YEs it requires a kit. Can be pricey, most people who are big off roaders or hard core applications use ...

...manual locking hubs? I also was thinking i can replace my vaccuum pump and plug the old lines going to the hubs to fix the a/c that only comes out the defrost. any body with some advice? They make a ...

...LOCKING HUB ON A 93 FULL SIZE BRONCO AND LEAVE THEM OUT AND DRIVE IT INSTEAD FOR BUYING THE NEW PARTS? you can take the out, but you have to seal the openings form water and debris. you can also ...

...for the front manual 4 wheel drive hubs when the 4 wheel is not engaged? The choices are free and lock. The hubs are not original equipment. free. You only lock them when you want 4 wheel

Question about 1995 F150 Styleside Regular Cab

1 Answer

...1995 f150 manual locking hubs after pulling off the outside cover(6 bolts)there is a large ring that has to come out on the inside of the hub,i used 2 small flat screwdrivers to remove it,then 1 snap ...

1995 Ford Bronco with Push Button 4X4 with automatic locking hubs. Has a 351 engine. The problem I have is when you push the button to engage 4X4, the front tiers to do not pull on either high or low.

Question about 1995 Ranger Supercab

1 Answer

...1995 For Ranger 4x4 with automatic locking hubs. When i engage the 4x4 the light comes on for 4 hi but not for 4 lo and i can hear a clicking in the transfer case but the hubs are not locking in. Any ...

1995 GMC Sonoma will not switch back out of 4 high? Are the front hubs still locked in? If you have manually locking front hubs, you probably have a bit of binding in the drive train due to the front ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...