Questions & Answers for: Elna foot lift janome sewing machine

Ad

...foot lift lever broke off. Elna serger 925 plastic lever that lifts presser foot broke off. Is that part available? Do I need to have it professionally fixed? Where? I live area code 91942 Here are 2 ...

Ad

...contessa 400 where can I find a power cord for this machine If it is the machine in the picture - it is a Janome based elna - I'd go to one of those sites. Janome power cord is also

Ad

Question about 2007 Mechanical Sewing Machine

1 Answer

...holding back the material by hand. Raise needle, lift pressure foot and remove work, triming off threads. Open the buttonhole with your seam ripper (put a pin across the end to avoid any

Question about 2005 Mechanical Sewing Machine

1 Answer

...foot control or power cord. How much and nearest supplier? Allison Dunedin New Zealand I would suggest you contact Elna NZ, they should be able to advise price and availability or direct you to a ...

Question about 2007 Mechanical Sewing Machine

1 Answer

...foot holder - lift the lever to release the foot If it is a clip on foot, then you just need to raise the pressure foot lever, put your fingers onto the pressure foot and press downwards, it ...

Question about 2007 Mechanical Sewing Machine

1 Answer

......

...lift my foot off the pedal the machine just carries on working!! I have even uplugged the foot pedal from the machine and it still carries on sewing!! This happens after the overlocker has been ...

foot pressure even across the fabric. Sometimes called a "thingy-a-jean" or similar. Don't bother trying to use the heavy gauge yellow jean thread unless you put it through the bobbin and sew with the

Question about Xplore 8600 Computerized Sewing Machine

1 Answer

...lift my foot off the foot pedal. My machine is a workhorse, but it won't quit stitching unless I lift the presser foot. Is it a computerized problem? sounds like it,, if it keeps happening I would ...

...Lift the presser foot up from the fabric, if the fabric is jammed in the feed dogs, and as the metal plate, take a screwdriver (some machines come with a special one). Unscrew the metal plate and use ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machine Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Elation Relation

Level 1 Expert

7 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...