Questions & Answers for: Chevrolet Suburban foot ball

Question about Chevrolet Suburban

1 Answer

Replace struts on rear hatch door on 2005 Suburban The hatch lift struts are held in place buy a half moon shaped spring clip at each end, use a flat blade pocket screwdriver and pry the clips up to ...

Ad

Question about 1994 Suburban

1 Answer

94-Chvy- Suburban-4X4-5.7 Lt.-350 last emaiYou mentioned on your l that you think it might be the upper and lower ball joints that's making my suburban sway from side to side. How or what do you look ...

Ad

2005 Suburban liftgate support (hydraulic strut) How do I replace this support? No exposed screws or nuts, The ends snap over a ball. There should be clips that pull straight out the pull the struts ...

there is a really bad wabble in the front right tire when i go atleast 25 and hit a small bump. how do i fix this? i would have the whole front system checked or go to a used tire place and let them ...

how to replace upper/lower ball joints on a 94 chevy suburban YOU NEED SOME TOOLS LIKE 1/8 1/2 DRILL BITS.YOU NEED A PUNCH.YOU NEED A BALL JOINT SEPERATOR.YOU NEED BALL JOINT PRESS TOOL TO PRESS OUT ...

How to replace ball joints on 2002 Chevy Suburban Ball joints seem to be worn and I need to change. Better to have someone else or can I do it? Fairly good mechanic. The ball joints are press in type ...

torque spec's upper ball joint for a 1994 chevy 1500. 2 wheel drive. 60-65 foot pounds.

Question about 1994 Suburban

1 Answer

...foot on the breaks. Its probally something they did when they spliced the wire the first. what could they have done to cause this? Check to insure a good ground on your rig, harness and trailer. Too ...

Question about 1994 Suburban

1 Answer

Struts and Ball Joints Repair The dealer has indicated that my Suburban with 45,000 miles on it needs new front struts because they are leaking and new front lower ball joints because they are worn. I

Replace a lower ball joint in 99 chey suburbàn You will need a ball joint removal kit that can be borrowed from an Oreilly part store. It looks like a tuning fork. Take of the wheel. Remove the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...