Questions & Answers for: fog lamp wiring

Question about 1999 Wrangler

1 Answer

...Fog Lamp switch. Now I need to find out where are the wires that I can hook up the fog lamps. I am assuming that they are already run into the engine compartment on the engine side of the firewall. ...

Ad

...fog lamp circuit. Check for obvious wiring connector or wiring to drl & fog lamps. check wiring for pinched or broken wires coming from sockets. If you don't find problem, you can trace wiring ...

Ad

Question about 1999 Denali

1 Answer

...on the left fender. The factory wires are WHITE/YELLOW for the left fog lamp and WHITE/ORANGE for the right fog lamp. What about control switches,wire, etc. Did you purchase all of that as

Question about 1999 Denali

1 Answer

Fog Lamp Switch' on it (Left Hand Turn & Parking/Headlamp Switches). However, the wiring for the fog lamps is probably there, you just need the multifunction switch which contains the fog lamp

...fog lamp circuits need to be diagnosed.  Your entire fog lamp circuit can be tested at the plug for the fog lamp relay located n the relay box.PIN 5 on the relay should have battery power at all ...

wiring aftermarket fog lamps so that they will work when the ignition is on? What wire should I tap into to have the fog lamps operate as oem fog lamps? Foglights are ******* in clear weather, so just

fog lamp the purple wire is voltage, the black wire is ground, check them both. You can see fog lamp relay, the is a fog lamp fuse for you to check. Not only check the fuse, check the fuse circuit for

...fog lamp, if so, the black wire is ground and the other color is voltage, use a test light to check. I didn't check everything for fog lamp control, so if a switch, you may have to check that and ...

...fog lamp, the two that I noticed, shorted to voltage or shorted to ground, these are B type codes, manufacturer specific. Check the codes. I saw two 40 amp fuses going to bcm, those fuses are hot all ...

...fog lamp operation. When the lighting switch is placed in the fog lamp position, the BCM (body control module) receives input signal requesting the fog lamps to illuminate. When the headlamps are ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...