Questions & Answers for: focus projector getting power

...focus and to turn up intensity of the projector lamps (red, green, and blu). If you turn it up too far all three projector lamps kick off. If this happens, power off the set and turn down the lamp ...

...Projector with no remote control to it. I lost the remote. I was trying to focus and see my options in the menu when I accidently hit the Key Lock to it. Now the projector will not turn on. I need ...

...projector will soon begin a startup routine and will cause an image to be shown on the screen. You can focus the image during that time. After the image goes away you should be able to display ...

...focus x3 projector. I follow instructions to connect with lap top and power for both. Then power up projector and then turn on lap top with xp. While lap top loads the projector projects the image. ...

power light on the top of the projector right next to the menu button is yellow that is bad. it indicates that the main board is not working which would explain the projector always being on. also the

...replacement power supply for in where to get a replacement power supply for in focus sp 5000 go on to the infocus website and find the closest authorized service center. ask for part number ...

How do I get into "service mode" Try pressing and holding the power button for 30 seconds. If this does not work do the same with the "up" arrow for 30 seconds. One of these shouyld take you to ...

...focus ring tightly and put some umph into it and completely unscrew the tube from the projector. Look inside the projector with a light and if you see any of the dried glue hanging from where it ...

Projector ... ? 15:01 https://www.youtube.com/watch?v=GYrFFrbWm5U Dec 3, 2010 - Uploaded by georgef551 This is a review of the Discovery Wonderwall MultimediaProjector, ... twist the lens to focus the