How do you make are sanca.fmt I do not know how to make the sanca.fmt file tell me Sandisk has an instructions link on the firmware upgrade page - I would follow it exactly
...Did your repairman find the problem? Thanks. Good Day, Joe; Suspect the formatter board, FMT PCB, it is not available through the factory though, it must be repaired. On the FMT check
...on all video sources, incl. when showing test patterns. Since test patterns are generated on the FMT board itself, it seems that the HSync is too close to the edge of a clock signal and is ...
Frigidaire FMT 148GP Microwave oven. Turntable Frigidaire FMT 148GP Microwave oven. Turntable does not rotate although Turntable On button is activated 1. the motor to rotate the glass table in the ...
Question about WD-62525 62" Rear Projection HDTV
...some open the shades If the menu is clear without the lines then chances are its failed caps on the FMT board. You can get the V26 FMT repair kit from the following link which also includes ...
green diagonal lines the FMT caps have most likely failed. You can get the V26 FMT repair kit from www.tvrepairworld.com which also contains instructions.
...light blinked 4 times, paused and blinked 4 times. Repeated 5 times. Error 44 = DVI cable between FMT & Engine disconnected - this means that either the cable that connects the FMT board (the ...
...or sound If you have a green blinking light, Most likely issue is with bad capacitors on the DM an FMT boards. 1) Look for bad 1000uf 16v caps on the dm board and the fmt board. 2) checked surface ...
need a docmentation on a Nortel FMT-6 Here you go: http://servv89pn0aj.sn.sourcedns.com/~gbpprorg/zine2/html/10/fmt.html
Question about WD-62525 62" Rear Projection HDTV
How do I fix DVI cable between FMT and Engine disconnected Got error code 44 found the response of DVI cable between FMT and Engine disconnected What / where is that located and how do I fix ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions