Questions & Answers for: flywheel torque 6 chevrolet

...flywheel to torque converter BOLTS. Remove transmission to Engine BOLTS. note location of any brackets or clips and move them aside. Slide transmission straight back, off locating pins, remove ...

flywheel bolts12-24 ft/lbs Rocker arm fulcrm bolts18-25 ft/lbs Spark plugs7-14 ft/lbs Timing chain cover bolts12-18 ft/lbs Vibration damper to crackshaft bolt110-130 ft/lbs Wheel lug nuts85-105 ft/lbs

Torque to: 7/16 Main Caps (2 bolt) Engine Oil 70 ft-lbs. 7/16 Inner Main Caps (4 bolt) Engine Oil 70 ft-lbs. 7/16 Outer Main Caps (4 bolt) Engine Oil 65 ft-lbs. 3/8 Outer Main Caps (4 bolt) Engine Oil

...flywheel into the torque converter. Disconnect the driveshaft, support the transmission and remove the transmission mount and crossmember. Disconnect the downshift linkage, any electrical plugs, ...

...torque converter cover on the bottom of the bell housing. Using the flywheel turning tool, turn the flywheel and examine the flywheel teeth. If damage is evident, the flywheel should be replaced. ...

...flywheel/ torque converter. Remove the converter from the flywheel, then you will see the flywheel bolts that mount the flywheel to the crankshaft--(I think there are 6). It is advisable to replace ...

...torque specifications on a 1987 cheverolet cavalier with a 2.0 litre engine My Chilton manual tells me 65-75 ft.lbs. I cn't send pics so this is the best I can do with tightening sequence. push ...

torque @ 3600 rpm ( These Numbers obtained with a Quadrajet Carb,1 5/8" headers , and an Edelbrock Performer intake part # 2101) Engine consists of the following parts: Block -part # 10066034, casting

Torque to: 7/16 Main Caps (2 bolt) Engine Oil 70 ft-lbs. 7/16 Inner Main Caps (4 bolt) Engine Oil 70 ft-lbs. 7/16 Outer Main Caps (4 bolt) Engine Oil 65 ft-lbs. 3/8 Outer Main Caps (4 bolt) Engine Oil

...flywheel cover remove 3 torque converter bolts again year determines size using a flywheel wrench or you can turn the flywheel using a good pair of players unplug wiring remove shifter linkage or ...