...motor does not work, the motor could be bad. or because it is an lcd projector, it could be the fly-eye lens or the light filter is singed and need replacing. also try matching resolution with
...The image it is projecting is blurred and dark and adjusting the options doesn't do anything Suzy Hi, Have you checked ot by replacing the Lamp?Check it or check the Fly-eye lens for the same. ...
...Fly Eye Lens I need to know how to get to the LCD Panels and Fly Eye Lens so I can clean them to hopefully stop a ghosting problems I have with my projector. thanks. HI there Firstly this ghosting ...
...fly-eye lens is. take the lamp out and shine a flashlight through the glass in the projector. if you see blackened burn marks on the other side of the glass, the fly-eye lens is burnt and needs ...
fly-eye lens might be burnt. return it. same problem here, looks like the fly-eye, especially if your model has fans going after the bulb stops, misuse of this feature seems to have caused the problem
Question about DV 410 projector lamp Projector Lamp
...of the projector. the fly-eye lens is burnt. there are 2 of them just inside the lamp housing. the first one may be fine, but the second one is probably burnt from overheating and needs
bright spot in center of lens, out of focus diffuser (fly-eye) lens fried or broken and needs to be replaced.
Question about RoadRunner LX100 Multimedia Projector
...clean the dust out of the projector and check the second diffuser lens (fly-eye) next to the lens. also check the polarizers next to the lcd panels. they tend to fry due to excessive dust and
the image is dull check the fly-eye (diffuser) lens. there are 2 next to the lamp housing. the second one usually fries and needs replacing. while you're in there, clean it out.
Usually answered in minutes!