Questions & Answers for: fluids 8n ford tractor

...8N Ford tractor 1950's model schematics We have just recently aquired an 1950's model Ferguson tractor. I need to know where to check the oil in the engine, transmission, rear end and such. Also it ...

...8n ford tractor is locked up i have the brakes off and it looks like it is in the body what can i do to free it up? i fixed it with heat and lots of wd40 and about 2 hours worth of elbo grease One of ...

I have a problem w/ my 9n it lifts but doesnt have any power to the lifting its only getting my bales abt 2 inches off the ground, it used to lift them a good 3ft, I removed the inspection plate, ...

...ford 1500 tractor Check your fluid, make sure it's not milky, from rainwater/moisture and is filled to proper height...if the fluid is clean, then the problem could be in the valves inside the pump. ...

...ford tractor with the starter drive stuck extened and wont retract.Help if hitting it with a hammer didnt help then unbolt it take it off and spray down in it with ether or stating fluid w-d-40 is to ...

mypowerliftwontwork theptoworksgoodtheliftwontwork Check your fluid first.

...Ford 8n's use a commion sump, rear end, transmission and hydraulics. Ford called for 80 or 90 weight gear lube depending on temperature (winter/summer) about 5 gallons The link below is a great ...

...you to the following website that is dedicated to the Ford 9N tractors? They probably provide yo with the best info and help. 9N FORD The Antique Ford Tractor Site 8n 2n 9n ford tractors

8n ford tractor blade is slow going up and down and sometimes wont drop at all unless use draft lever. i have put 3gal of desiel fuel in tranny ran tractor around for a hour thin droped the fluids and

...Ford 8N ... 6 - How long has it been since you changed the hydraulic fluid? ... If that didn't do it, read on. ... then remove the bottom bolt from the inspection plate that has the hydraulic ...