Question about ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum
...float to my shop vac is shaped like a cup has an open end and a closed end. I would like to know if the float goes into the lid cage with the open end facing up or the closed end facing up It goes in ...
Question about 584-06-00 Canister Wet/Dry Vacuum
...shop/vac. A bit old, but have used for dry application. Now need to use for wet application as basement flooded yesterday. No standing water. Need vac for taking water out of stuck down carpet. Need ...
Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum
...in bad shape and hasn't been replaced? no it usually means that the vac is full and the ball then floats up and blocks the vac so that water doesn't get sprayed
Question about 925-13 Canister Wet/Dry Vacuum
...Model LM500 from dry to wet pick Change shop Vac Model LM500 how do I change from dry to wet pick up To change from dry to wet, remove the paper filter and install ball float if not already ...
Shop Vac. We used it for the first time to try and **** up water in the basement. Each time we turned it on, it would shut down after collecting less than 1" of water. We had to remove and squeeze out
shop vac. What's involved in converting it from a dry vac to a wet vac? I think it does both, but I've only ever used it to clean the car. generally you remove the filter and just use the foam
Question about 5841627 Wet/Dry Vacuum
shop vacuum float rises to shut off vaccuum immediately when turned on. Is using foam filter covered by Shop vac paper filter. Vac is shopvac 86L450 bought used with no filter. I bought Shop Vac foam ...
Why won't it turn back on? If it is a wet or dry vac, check for a binding float switch inside the cage. You can sometimes free it by shaking the top assembly up and down vigorously.
Question about 5841627 Wet/Dry Vacuum
my shop vac QSPQ 10 gallons has lost power...what happed was vacuumin the pool GALL there is a float inside vacuum that will prevent the vacuum from sucking water if tank is full.
Question about 5841627 Wet/Dry Vacuum
SHOP VAC. MY PROBLEM IS THAT WHEN I'M DRY VACING ABOUT EVERY MINUTE OR SO THERE I WILL HEAR A CLUNK AND THEN IT WILL STOP SUCKING. I HAVE TO TURN IT OFF AND WAIT AND THEN TURN IT BACK ON TO SUCK AGAIN
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions