Questions & Answers for: flat iron reset Coffee Makers & Espresso Machines

iron and ONLY the ceramic!...I did it with a small butane torch just heating the ceramic flat surface) to "force it" to go over that boring 69 number. Let i go as high as you can, preferably up to 450

button. Sometimes the settings get shifty, so resetting the device can sort out the problem. 4. If none of the steps work, take it back. There is something wrong with the flat iron, like a short in it

flat iron goes to 69 than shows error message It's not working! I've tried unplugging it for a minute, plugging it back in and holding the power button on....am i missing something. I've had this damn

...reset button will not go in. I have had this chi iron for about 2 years but have only used it a handful of times. It should not have broken with as little use as it has had. If you need it repaired, ...

...flat iron and unplug from electrical socket (wait for 10secs). 2. Then plug the iron back into the electrical socket. 3. Press & hold down the HIGH [∆]button, then press ON/OFF button. ...

flat iron Took my chi to Europe and despite having a converter that was supposed to step down the power from 220 to 110, my straightener fried. Doesn't turn on at all despite resetting the GFCI in the

...Flat Iron 1 I had bought a Croc infrared Flat iron a while back ago from the Bronner Bros Hair show. It was working fine up untill a couple months ago and now when it trys to heat up an error message ...

flat iron said 59 then err then shuts off I tried resetting now says 42 then err and off Nothing about definitive fixes, but people complaining about them and that the life span is only 2 years! There

...flat iron and a power outlet. To eliminate any power source issues, try using a different outlet or USB port for charging. A device reset might resolve temporary problems. Unplug the flat iron from ...

...flat iron for hair. It turns on then gives error message. What can I do? Question edited for clarity, but it helps to know WHAT the error message or code is? Try a power reset first * to reset it: ...