Questions & Answers for: flashing green red error pioneer

pioneer elite pr-1010hd plasma tv tv will not power on. red led power light flashes 3 times It has an internal problem. Needs a local repair man. :(

...red light is flashing 5 times and won't turn back on This a factory issue and usually requires service. Most cases it is a bad power supply caused by a surge or powering off and on too fast ... sorry ...

Red, Blue and Green. Some plasma's have that feature, why, I don't know, they only cause issues with the consumer. They are listed in the service mode but if I were you I wouldn't go there and besides

...and on the mediar reciver as well tv dont come on help please got a pioneer plasma when I turn it on no picture the standby light at the front is flashing alternating green red green red can you

pioneer pdp-ro4e keeps going on standby my plasma pioneer tv gose in to a pioneer media reciver my tv wont come on and they both flash green red green red please help

...red. Can't get a green light; can't get a picture. Power supply board is dead.The board where the power a/c cord plug into it.Replace the power supply board.Tries websites like Shopjimmy.com,Ebay.com ...

...Error message in upper left of screen...Red Hat Linux release 9 (Shrike) Kernel 2.4.24 on an 1686 cas01 login:vu2010: init_module() fails. There's more, but you get the gist. Contact any ...

...green and red alternately whilst on the receiver it flashes green 6 times. I can't get the tv to turn on... I have a pioneer pdp-r05XE, on the plasma, the light flashes green and red alternately ...

...green LED) and standby (red LED ) lit up. Both these remain lit, until I decide to shut it off. The media receiver shows a green (healthy?) Light in all of this. Since I don't have a service ...

...the red/green fade. Blue and Yellow are fine. No consitency. TV could be on 1 hr or 6 hrs before it happens? Its the electrolytic capacitors located in the power supply board. There are 2 of