Questions & Answers for: flash board

...flash cycle. Is this thing even worth attempting to fix? Many thanks for any help or advice I can get. I believe the problem is either in the G board ( power supply) or the D Board ( high voltage) as ...

flash board. The capacitor is attached to the board. The flash board has a serial cable and two wires that connect to the main circuit board. Severing one of the wires will stop the flash from working

...board) 4. FLASH-ON-ON = CPU Fault/failure 5. FLASH-ON-FLASH = LCD detect failure/fault 6. ON-ON-FLASH = MINI pci card (controller) failure/fault 7. FLASH-FLASH-OFF = Keyboard fault/failure 8. ...

...Flash Board part number is as follows.. 147667311... FLASH UNIT, available in Part Store. If you are not comfortable with replacing above flash board in DSC-S85, take camera to qualified camera tech ...

...flash board will be replaced. Part number of flash board is as under.. A1444049A... ST BLOCK ASSY Available in Part Store. If you are not comfortable with replacing flash board then take camera to ...

flash code for 8 times on a panasonic TC-50PS14 thought I would post this here for everyone. 1 blink STV 5v sense DG Board 2 blinks 15v SOS D Board 3 blinks 3.3v SOS D Board 4 blinks Power SOS P Board

power light flashing if flashing 7 time need replaced sd board and su and sd board Panasonic TXNSD1RJTU SD BOARD BOARD, SD (Y SCAN DRIVE LOWER ASSY) Panasonic TXNSU1RJTU SU BOARD BOARD, SU (Y SCAN OUT

my panasonic plasma flashes ten (10 ) times and pauses and flashes again ten ( ten) times but won't stat, what is the problem? 10 flashes is an special signal? 10x flashing is a specific error code. ...

flash on and off it flashes bright to dim Good day sir chris!!!!Welcome in fixya and I'm happy to work with you...OK lets proceed to your TV problem..The possible problem is not the power supply..

flashing screen, sounds is there, can see menu but screen dimly flashes removed back cover and t-con has 3 blue lights on it, can see white light around edge of inside panel but flashes on and off ...