...wont stay lit can anyone help me go to this site www dot desatech dot com. Here you'll find parts to repair your heater. a propane heater uses a millivolt generator to sense the flame. along it's ...
Question about D-E36 Infra-Red Wall Mounted Panel Heater
...flame wont come on There is a therma-couple that the flame burns against. When it is working correctly it allows gas to travel to the flame. When it goes out you get no gas, as a safety feature. ...
Question about D-E36 Infra-Red Wall Mounted Panel Heater
...flame wont stay lit. Have a Maytag gas dryer, model#:LDG7314AAE serial#:16068237QF, and the flame will not stay lit. It warms up ignites and then after 15 to 30 seconds it shuts off. It repeats the ...
...Flame gas wall heater wont stay lit, pilot light stays lit but the blue flame went out and had smell of gas I shut off the gas supply but, dont know what is the problem thanks, marty you could have a ...
...wont stay lit, even when on high Pilot lights are supposed to stay on when the flames are burning. If they didn't the flames would go out, because the pilot flame against the Thermocouple keeps the ...
...wont stay lit If you are talking about the little flame that is supposed to be burning at all times then you need to go to a hardware store and purchase a thermocouple. It is a small copper tube that ...
Question about Solitaire G755 Gas Kitchen Range
...till the flames come on then everything shuts off ive tried cleaning all the dust out of the heater but it wont stay lit except when its set on pilot Flame sensor possibly. Does the flame look
Question about Pilot Burner for Natural Gas, Left single tip Q345A1313
...wont stay lit Is it the Pilot, or the main burner that won't stay lit? The pilot has a little 'flame rod' in the path of the pilot flame, that conducts a tiny current thru the flame, to a detection ...
Question about Pilot Burner for Natural Gas, Left single tip Q345A1313
...wont stay lit check flame height perhaps the tip needs cleaned or flame adjusted . Generally the problem is the thermocouple. If the pilot flame is firmly on the thermocouple then replace the ...
Question about Pilot Burner for Natural Gas, Left single tip Q345A1313
...flame goes out so basicly it wont stay lit safety interlock is not being disabled. Older types have a mercury filled bulb flame sensor, newer types have a thermocouple or millivolt sensor. Diagnose ...
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions