Questions & Answers for: what is fixture wire

Ad

...the light fixture then you just have to remove the bulbs from the fixture and wire assembly remains intact then just fit the same bulbs in to the new light fixture without removing the wire

Ad

...wire on fixture. When I removed the inside wall switch, there were no wires connected to it; it was a dummy. Inside the switch wall box there are 3 black wires twisted together and capped, 3 white ...

Ad

Question about (102-5G108-RW5)

1 Answer

...wire was previously capped off), the fixture comes on but I am unable to turn it off with the pull-chain. Any advice would be appreciated. It sounds like you have accidentally by-passed the switch. ...

Question about Lighted Switch

4 Answers

...fixture. Mark the white wire with a band of black electrical tape to signify it as a hot return line. This line becomes the switched hot line, and the fixtures are powered from this line. All can be ...

I'm putting a new adition on and am wiring it. I have two rooms with ceiling fixtures and seperate switches and will put them on the same circuit. The first room will be powered from the fuse box to ...

splice the fixture wire leads onto the cable (don't be overly concerned about matching polarity), and seal the splice with electrical tape and a silicone sealant. I hope this information helps. Bill B

...fixture wire in that j box. -Turn the lights on. -If it trips, you know -(A)-the problem is in one of the three lights you still have connected and -(B)-if it stays on you know the problem is in the ...

Question about Lighted Switch

1 Answer

wire nuts. Attach new light fixture wires same way as old was removed.Make sure black wire goes to black wire on light. White to white, green to bare copper.Copy and paste following links to see basic

Question about Lighted Switch

1 Answer

...fixture wire. Remove this wire nut. At this point I usually use an electrical tester to double check that the power is off by touching one side to the newly exposed black connection and any grounded ...

Question about -Aire Brushed Nickel Remote Control Fan MIA F518-BN

1 Answer

...wire light does not work is it the dimmer switch on the fixture Check for 120Vac cming into the light fixture, if its there, the problem is your fixture, the fixture switch, or the way you wired it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...