...fixing film is detected. The reading of the main thermistor is 100°C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing ...
...fixing film rotation error. Typically the fixing film will need to be replaced. On occasion the film will get destroyed by another problem in the fixing assembly... the cleaning roller or pressure ...
...fixing film has been detected. The reading of the main thermistor is 100°C or higher and the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor ...
Fixing film sensor failure The fixing film sensor is faulty. - Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB. 8.2.1.1 Controlling the
Question about (6981A002AA) for imagerunner 2200, 2800, 3300 Print Server
...Fixing film rotation error An error in the rotation of the fixing film is detected. The reading of the main thermistor is 100°C or higher and, in addition, the fixing film sensor does not detect ...
FIXING FILM WHICH AT MOST TIMES IS CAUSED BY TORN FIXING FILM SIMPLY CHECK AND REPLACE BUT CONTACT YOUR SERVICE TECHNICIAN TO AVOID DAMAGING THE ENTIRE UNIT An error in the rotation of the fixing film
fixing film is detected. The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor
...fixing film assy.to be replaced or the film (to minimise the cost)may be replaced if the heater contact points are ok. If problem still found check the rotation sensor .Thanks. the error come fixing ...
...fixing film. Mostly the film tear off at fixing film assembly. The film may be replaced at less cost as 3rd party service or the fixing film assy. replaced as geuine spare. The other problem may ...
...fixing film. mostly the film tears. the rotation sensor could not detect the rotation of film or abnormal rotation of the film. the solution is to replace the film or replace the fixing film ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
