Questions & Answers for: fix kenmore canister power head

Kenmore Canister, on the power head, there are usually 2 screws on the bottom of the unit. You must remove both screws and unlatch the top cover; first from the back by the swivel and secondly on both

...is located that restart (or reset) button that fixed the problem? thanks a lot. Usually there is a red reset button to push on top of the power head, but some are on the back edge of the

...Kenmore Progressive canister vacuum. Therefore the powerheads pipe/hose keeps coming unattached from the head. Is there a way to replace this part? This is for a Kenmore Progressive Canister vacuum ...

...Kenmore canister vacuums. It is the result of a part inside the handle of the hose (where you would have your hand) which has broken and no longer properly supports and keeps in place the electrical ...

...Kenmore canisters are very subject to dirt build up on internal contact rings where they swivel at the elbow adjoining the vac. They are also prone to intermittent connections at the handle/wand ...

...how do I fix it? Turn the power head over and you will see (2) screws. Remove the screws and the top cover will come off and you can get to the belt. Here is the belt you need: Kenmore 23812 ...

...Kenmore), and the hose is not getting power down to the power nozzle. If however you turn on the power nozzle, and you can hear the motor in the power nozzle come on when you switch it to carpets, ...

...Please let me know if this didn't fix it, and I'll help you walk through this further and help you diagnosis the power head further. Thanks, Chris J. ...

...Kenmore canister power head has broken , can it be repaired ?? the wire which powers the power head appears to be broken I can't say without more info, but almost any wire can be spliced together. ...

Kenmore canister vacuum cleaner only works with carpet attachment model # 116.21514012 VC will only operate with the carpet power-head attached, but has no suction. When using handheld feature, it ...