Questions & Answers for: fix jandy pool heater fault

fl4 and fl3 fault fl4 and fl3 faul how do I fix this? fl3 not rectification fl4 fault ignitions must replace ignitor kit and rectification kit from jandy need model # for parts

jandy lite 2 pool heater I have a error code of 4f, does anyone have any ideal how to fix it? replace ignitor and make sure fuses ok

jandy lite 2 heater model lj325n - code fl4 - hot surface igniter problem- I tapped the gas valve and checked the fuse , still getting the same code. Igniter circuit is open. Check fuses on igniter ...

how to fix fuse link / field in jandy heater replace down towards bottom has two white wires its white ceramic if bad check gas pressure

I have a Jandy LRZ125En throwing fuse link/field fault what can I do to fix this? replace fusible link ( either too low gas pressure or need wind stack)

reset We repleaced the ignitor assembly after they melted...is there a reset button? We are still getting fuse read error-Code fuse link/field bad fusible link replace and check gas pressure

Fault Fuselink/Field overheating check gas replace fuse might need chimney

how too reset or clear controler fuselink/field fault find faults in menu then hold down button for 7 seconds it will clear the faults

...pool heater (Jandy model LX400P-L) doesn't heat up the pool. The panel displays a code "HI LIM SW", a fault description that states a "high limit switch circuit is open". How do i correct and ...

...Jandy LRZ pool heater that was giving Fuse Link Field error. I had replaced both fuse links rollout fuse link and high vent fuse link and am still getting same error msg on display. I also replaced ...