Questions & Answers for: fix emergency brake lighting gmc

...fix this? emergency brake not holding what can i do. Emergency Brakes have slack on the cable . this can be adjusted by moving the adjuster at the cable to bring the cables to both wheels tighter ...

Ad

Emergency lights and turn signal lights still work what seems to be the problem can it be the brake switch / were is it locate? It sounds like the brake switch, that is usually located along the shaft

Ad

...Emergency flasher switch still turns on flashers properly and right turn signal works, That vehicle has all three switches attached to the same module. Spray a little wd-40 into the flasher switch. ...

...abs warning light come on gmc yukon 2003 CHECK FUSES TO BRAKE AND ABS BRAKE SYSTEM.IF FUSE OKAY NO BLOWED BULBS. YOU HAVE A ELECTRICAL PROBLEM IN BRAKES AND ABS BRAKE UNIT.THE DEALERSHIP HAS TO

Question about 1996 Yukon

2 Answers

emergency brake light stays on the dash. is it a troubleshooting light? It probably indicates that the cable is not being fully retracted when brake is disengaged. Spray as much of cable as possible ...

Question about 2000 Yukon XL

1 Answer

...again. Please help sounds like emergency brake is on or the switch is broken try releasing it and see if you maybe hit it if not apply it and release it and see if that fixes your issue good ...

Question about 2005 Yukon Xl Denali

1 Answer

...a 2005 GMC Yucon. My emergency brake cable broke and my emergency brake is stuck on. Is there another way to release my emergency brake. grip the end of the cable with vice grips and give it a

Question about 2002 Yukon Denali

0 Answer

...without me even hitting the brakes. Today I drove it and smoke was coming from all four tires. feels as if I am driving with the emergency brake on. Help! have it looked at by a professional ...

emergency brake in the green light does go off and when I release it then the green light comes back on, but still no DRL at all. Can someone please tell me what I can do to fix this. Man told me when

Brake light indicator is on, but the fluid reservoir is full and the emergency brake is released but light is still on Check the emergency brake light switch, it might be stuck on.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...