Questions & Answers for: fix clutch chatter

Question about 2005 Taurus

1 Answer

...clutch is engaged. My question is, what is going bad and how do I fix it? Thank you for your time. Mark Hi This could be any number of things, low system pressure, chattering relay, faulty cycling ...

Ad

...transmission at highway speeds,shifts fine,no chattering.push in the clutch and the whinning stops. My first thought from your description is that its the throwout bearing.Cheap fix and simple to

Ad

...chatter even with the A/C turned off? If yes then I would say the clutch bearing is bad on the compressor. If no, it only does it with the A/C on, then I would say the compressor is bad. Actually ...

...clutch chatter and your performance will be poor mileage will drop. And the clutch chatter can cause the flywheel to be damaged and need to be surfaced, it could burn up the slave cylinder, so it is ...

Question about 1990 F150

1 Answer

5.0 CLutch chatter if there is a lot of miles clutch most likely there are hot spots on fly wheel. the only fix is replace clutch and pilot bearing an machine fly wheel.

...chatter and hardly spin, drivers side chatters,passenger side spins, put in park, then back in drive and then passenger side chatters and drivers side spins It sounds like your limited slip ...

...to me like you didn't and abused the clutch beforehand... To my knowledge, there's no fixing that unless the clutch comes out.. Safe to say you're O.K... Just get used to

Question about 2000 ECHO

1 Answer

...clutch inside the motor. You fixed the external problem now you have to fix the internal one. If the starter motor is turning but the motor is not, then the one way clutch is slipping on the large ...

Question about 2000 Forester

1 Answer

...fix the problem. The issue is not present after short drives, but is very apparent after driving for 20 or 30 minutes. Any ideas Just because you changed the fluid doesn't mean if this is ...

Question about 1999 Corolla

1 Answer

...fix this is to have a new clutch assembly installed along with machining the engine flywheel. To avoid this condition after repairs are done release the clutch as soon as possible, don't "slip" it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...