...radio is a Kenwood model: KDC-241SG. 3 of the plugs that were originaly plugged into the back of the Clarion had to be omitted from the Kenwood, namely the yellow, green & the blue plugs. The Kenwood ...
...out fitted a kenwood head unit in my vauxhall vectria , keeps cutting out when i turn the steering wheel rewire the radio strait to your battery that will make share that you wont make a short
Question about KDC-MP228 CD Player
...fit the wiring harness into ur dodge the wiring has been crossed so it wont work, if u go 2 the Kenwood US site and down load the KDC MP 228 manual it has a good wiring dirgram and with a bit of work ...
Question about DDX-6019 Car DVD Player
...kenwood ddx 5032 do i need to earth the park wire or run 12v to park wire have left wire connected to nothing but comes up with park on wen dvd inserted. i have the same player in my truck. this is a ...
...I have a Kenwood KRV 6060 receiver which has 2 switched power outlets on the back - They are unlike anything I have seen before so where can I get a (UK) plug to fit? Thanks :-) Dave Try Radio ...
fit my kenwood KDC 2025? This is a DIN sized unit and will fit nearly any kit. You need the kit/ harness based on the car you have. Just search your car year, make, and model then "radio dash kit". do
Kenwood tk-272g radio wont transmit I have a kenwood two way tk-272 g radio used for fire and police and is programed. However when i go to key either my lapel microphone or the side microphone the ...
Question about VR-7070 Receiver
...Kenwood mobile 2 way radio VHF 32 channel. Want it to display frequency info instead of channel info. For eg. 'Ch XX' is the standard format. I want the display to show the frwequency ...
Question about VR-7070 Receiver
Kenwood Tk2402P VOX. What type of speaker mic is required for this to operate after option has been installed in radio. None. Speaker mics do not operate with VOX. There are headsets that will, but ...
...Kenwood car radio Ah, it's you :>)
For an aftermarket radio, you can contact Kenwood or pay for the code. For a OEM factory fitted Kenwood, you can get it from the dealership with registration ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions